Industrial Pharmacy 1 Important Questions with Answers (Unit-wise, BP502T)

Industrial Pharmacy 1 Important Questions with Answers (Unit-wise, BP502T)

By Vignesh, Pharma Graduate · Member of LBP · Updated November 2026

Industrial Pharmacy I covers how real dosage forms are made: preformulation, tablets, coating, capsules, parenterals, ophthalmics, aerosols and packaging. It is a long syllabus, but the paper keeps returning to the same set of topics.

These are the Industrial Pharmacy 1 important questions, unit-wise, for BP502T (PCI syllabus). We have marked the most-asked ones with ★ and added two sample answers plus five MCQs.

Want every answer written out? The Industrial Pharmacy I Exam Pack has model answers for all the ★ questions. Just ₹49. See the pack →

Industrial Pharmacy I exam pattern (BP502T)

SectionQuestionsMarks
I. Objective (MCQs / fill in the blanks / one-word)10 × 2 (or 20 × 1)20
II. Long answersAnswer 2 of 3 × 1020
III. Short answersAnswer 7 of 9 × 535
Total3 hours75

Tablet and parenteral answers score best with a process flow chart and a table of defects or QC tests. Draw them neatly; examiners mark them first.

Industrial Pharmacy I important questions, unit-wise

★ marks the questions asked most often in university papers. Prepare these first.

Unit I: Preformulation

Long (10 marks)

  • ★ Define preformulation. Discuss the physical characteristics studied in preformulation (crystallinity, polymorphism, particle size, flow, solubility, pKa, partition coefficient).
  • ★ Discuss the chemical degradation of drugs (hydrolysis, oxidation, racemisation, polymerisation) and their prevention.

Short (5 marks)

  • ★ BCS classification · Flow properties (angle of repose, Carr’s index, Hausner ratio)
  • Applications of preformulation in solid, liquid and parenteral dosage forms · pH–solubility profile

Unit II: Tablets, coating, liquid orals

Long

  • ★ Classify tablets. Describe the wet granulation method and the excipients used in tablets.
  • ★ Explain tablet processing problems (capping, lamination, sticking, picking, mottling, chipping) with causes and remedies.
  • ★ Explain tablet coating: types, film-coating materials, coating equipment and coating defects.
  • ★ Write the in-process and finished-product quality control tests for tablets with IP limits.
  • Explain the formulation of suspensions / emulsions and their evaluation.

Short

  • ★ Direct compression · Dry granulation (slugging, roller compaction) · Rotary tablet press
  • ★ Sugar coating steps · Enteric coating · Disintegration test · Dissolution apparatus (types)
  • Weight variation test · Friability · Hardness · Syrups and elixirs (manufacture)

Unit III: Capsules and pellets

Long

  • ★ Describe the production of hard gelatin capsule shells. Explain capsule filling and QC tests.
  • ★ Describe soft gelatin capsules: shell, content, base adsorption, minim/gram factor, manufacture (rotary die) and QC.

Short

  • ★ Capsule sizes · Base adsorption and the minim/gram factor · Pelletisation (extrusion–spheronisation)
  • Defects in capsules · Sealing and banding

Unit IV: Parenterals and ophthalmics

Long

  • ★ Define parenterals. Classify them. Discuss the formulation of parenterals (vehicles, additives).
  • ★ Describe the production of parenterals: facilities, aseptic processing, filling and sealing of ampoules and vials.
  • ★ Write the quality control tests for parenteral products (sterility, pyrogens / LAL, particulate matter, leakage, clarity).
  • Write the formulation and evaluation of ophthalmic preparations.

Short

  • ★ Water for injection · Large volume parenterals · Freeze-dried (lyophilised) products
  • ★ Pyrogen test (rabbit) and LAL test · Leaker test · Containers and closures for parenterals

Unit V: Cosmetics, aerosols, packaging

Long

  • ★ Define aerosols. Describe the components (propellants, containers, valves), types of systems, manufacture (cold and pressure filling) and evaluation.
  • ★ Discuss pharmaceutical packaging materials (glass, plastics, metals, rubber) and the QC tests for containers.

Short

  • ★ Types of glass (I, II, III, NP) · Formulation of lipsticks / shampoos / toothpaste / cold cream / vanishing cream / sunscreen / hair dye
  • Propellants (CFC, HFA, hydrocarbons) · Metered dose inhalers · Factors influencing the choice of containers

INDUSTRIAL PHARMACY I EXAM PACK · B.PHARM SEM 5

All the unit-wise important questions above with 16 model answers in exam format, 37 MCQs with explanations, in one PDF. Instant download. ₹49 ₹99

Get the answers →

Need every Sem 5 subject? The B.Pharm Sem 5 Exam Pack covers all theory papers for ₹99.

Sample model answers

Here are 2 answers written the way examiners like them. The pack has model answers for every ★ question.

Pellets and pelletisation (5 marks)

Pellets: small, free-flowing spherical units (0.5–1.5 mm), made by agglomerating fine powders. They are filled into capsules or compressed into tablets (multiple-unit dosage forms).

Advantages:

  • Uniform gastric emptying and less variation in absorption; less dose dumping risk.
  • Less GI irritation (spread over a larger area).
  • Good flow and packing.
  • Easy and uniform coating (controlled release).
  • Different release profiles can be mixed in one capsule.
  • Incompatible drugs can be separated.

Formulation requirements: drug, spheronising aid (microcrystalline cellulose: the most important, it gives plasticity), binder (PVP, HPMC), diluent, and water.

Pelletisation processes:

  1. Extrusion–spheronisation (the most common):
    1. Dry mixing.
    2. Wet massing with granulating liquid.
    3. Extrusion through a screen (radial or axial extruder) into cylindrical rods (extrudates).
    4. Spheronisation: on a rotating friction plate (spheroniser / marumeriser), the rods break into short pieces and are rounded into spheres.
    5. Drying (FBD).
    6. Screening and coating.
  2. Solution or suspension layering: the drug is sprayed onto non-pareil seeds (sugar spheres) in a fluid bed (Wurster) coater.
  3. Powder layering: dry powder and binder are applied to seeds (in a rotary processor).
  4. Spray drying and spray congealing, cryopelletisation (liquid nitrogen), balling and melt spheronisation.

Equipment: extruders, spheroniser (marumeriser), fluid bed (Wurster) coater, centrifugal (rotor) granulator, coating pans.

Tablet processing problems (10 marks)

DefectDescriptionCausesRemedies
CappingThe top (cap) separates horizontally from the tablet, during ejection or laterAir entrapment; too many fines; granules too dry; worn or deep-concave punches; too much compression pressure or too fast; insufficient binderUse less fines; increase binder; add moisture; reduce pressure or speed; pre-compression; use flat punches; polish or replace tooling
LaminationTablet splits into two or more layers horizontallySame as capping: air entrapment; excess lubricant; rapid relaxation of the tablet; hydrophobic lubricantReduce lubricant; pre-compression; tapered dies; slow the press
ChippingEdges break offWorn punches; dry granules; incorrect machine settingsPolish or replace punches; dampen granules; adjust ejection
CrackingSmall cracks on the top or bottom centreLarge granules; tablet expanding in the die; deep-concave punchesSmaller granules; use tapered dies; adjust binder
StickingMaterial adheres to the die wall; the tablet surface becomes roughGranules too wet; insufficient lubricant; low-melting ingredientsDry the granules properly; increase lubricant; refrigerate low-melting materials
PickingMaterial is removed from the tablet face and sticks to the punch face (especially in embossing and letters such as A, B, O)Moisture; low-melting substances; embossing design (small enclosed areas); scratched punchesPlate punches with chromium; add antiadherent (colloidal silica, talc); redesign the lettering; dry granules
BindingTablets stick in the die; ejection is difficult (a sound, rough edges)Too much moisture; insufficient lubricant; worn diesIncrease lubricant (or use a more efficient one); dry granules; use tungsten carbide dies
MottlingUneven colour distribution with light and dark spotsDrug colour differs from excipients; migration of dye during drying; coloured degradation productsUse a lake (insoluble) colour; dry at lower temperature; disperse the colour in the binder; use a coloured diluent
Double impressionTwo embossing impressions on the tabletLower punch moves freely and strikes twice (no anti-turning device)Use anti-turning devices (keyed punches)
Weight variationUnequal tablet weightsPoor flow, segregation, variation in granule size, hopper levelUniform granules, glidants, constant hopper feed (force feeder)

5 practice MCQs with answers

1. According to BCS, a drug with low solubility and high permeability belongs to:

  • a) Class III
  • b) Class IV
  • c) Class I
  • d) Class II
Show answer

Answer: d. Its absorption is dissolution-rate-limited.

2. A Hausner ratio below 1.25 indicates:

  • a) Good flow
  • b) Very poor flow
  • c) No flow
  • d) Poor flow
Show answer

Answer: a. Above 1.5 indicates poor flow.

3. The most common degradation pathway for esters and amides is:

  • a) Photolysis
  • b) Racemisation
  • c) Oxidation
  • d) Hydrolysis
Show answer

Answer: d. Aspirin, procaine and penicillins hydrolyse.

4. Accelerated stability testing (ICH) is carried out at:

  • a) 30 °C / 65% RH
  • b) 40 °C / 75% RH
  • c) 50 °C / 90% RH
  • d) 25 °C / 60% RH
Show answer

Answer: b. For 6 months.

5. A superdisintegrant among these is:

  • a) PVP
  • b) Lactose
  • c) Magnesium stearate
  • d) Croscarmellose sodium
Show answer

Answer: d. Others are sodium starch glycolate and crospovidone.

Free Industrial Pharmacy 1 notes, unit-wise

Related guides

Frequently asked questions

Which topics are most important in Industrial Pharmacy 1?

Preformulation parameters, tablet granulation and excipients, tablet processing problems, coating defects, QC tests for tablets, hard and soft gelatin capsules, parenteral formulation and QC, and aerosols.

How should I write tablet processing problems?

Use a table with four columns: problem, definition, causes and remedies. Cover capping, lamination, picking, sticking, mottling and weight variation.

What is the difference between Industrial Pharmacy 1 and 2?

Industrial Pharmacy I (Sem 5) is about manufacturing dosage forms. Industrial Pharmacy II (Sem 7) is about scale-up, technology transfer, regulatory affairs and quality systems.

Is this for the PCI syllabus?

Yes, it follows the PCI B.Pharm syllabus for BP502T, Semester 5.

INDUSTRIAL PHARMACY I EXAM PACK · B.PHARM SEM 5

All the unit-wise important questions above with 16 model answers in exam format, 37 MCQs with explanations, in one PDF. Instant download. ₹49 ₹99

Get the answers →

Need every Sem 5 subject? The B.Pharm Sem 5 Exam Pack covers all theory papers for ₹99.

About the Author

You may also like these